- Fits UP3D i5 PRO — requires the UPCAM 4.1 Angled Implant Module.
- Three sizes — T16 Ø 1.9, T17 Ø 1.6 and T18 Ø 1.4 mm.
- For cobalt chrome and titanium — ground for metal.
- Ø 6 mm shank — the i5 PRO collet. Not interchangeable with the 4 mm tools for P53DC and P55D.
An angulated screw channel needs a seat the screw head can pull against, and that seat sits sideways under the channel wall. A ball or flat bur comes in from above and cannot reach it — the geometry is simply not there. A T-slot mill has a cutting head wider than its neck, so it goes down through the channel and cuts outwards, forming the undercut in one pass.
These are the metal versions, for cobalt chrome and titanium. Run them at the feed the UPCAM strategy sets; a T-slot mill is unforgiving of side load because the neck is the weakest point. Keep a spare of each size — a broken tool mid-channel means the whole abutment is lost.
Specifications
| Tool (i5 PRO) | T16 – T-slot mill Ø1.9, T17 – T-slot mill Ø1.6, T18 – T-slot mill Ø1.4 |
| Used for | Metal |
| Brand | UP3D |