- Water-cooled spindle — 80,000 rpm and a stable process through long runs.
- Three blocks loaded at the same time.
- Glass ceramic, zirconia, composite, titanium and CoCr.
The N4+ is the machine for anything that has to be ground wet. Three blocks loaded means it keeps working while you do something else, and the titanium bases make it a real implant machine. If you are going to mill premilled titanium it runs with lubricant in the coolant water — otherwise tap water is enough.
Key features
Water-cooled spindle
Keeps the process stable even when the run is long and the material hard.
80,000 rpm
The highest spindle speed in the vhf range. Fine surface in glass ceramic.
Closed liquid circuit
Clean handling of the coolant, less spillage on the bench.
Three blocks
Load once and run several cases without going back.
Eight tools in the magazine
Automatic tool change during the run.
dentalcam included
No licence fee.
Key figures
Axes4
Tool magazine8 tools
Spindle800 W, 80,000 rpm
Repeatability3 µm
Capacity3 blocks up to 45 × 20 × 20 mm
MaterialGlass ceramic, zirconia, composite, titanium, CoCr
Dimensions364 × 460 × 473 mm
Weight52 kg
Compressed air25–45 l/min at 4–8 bar
Electrical100–240 V, 640 W
Softwaredentalcam, no licence fee
Warranty24 months
Specifikationer
| Varumärke | vhf |
Alternativprodukter
These other products might interest you