- Twelve blanks in the changer — around the clock without stopping.
- The entire milling file sits in the machine — computer trouble does not stop it.
- Licence-free software — no ongoing annual fees.
The P53DC is built to work when the lab is empty. Twelve blanks and eleven tools loaded means mixed materials one after another without manual handling, and once the job has started the entire milling file sits in the machine's own memory — the computer is no longer needed. It mills fast, the components are generously dimensioned to take that pace, and the tools are both affordable and in stock with us. If something interrupts, milling resumes from the point where it stopped instead of starting over.
Key features
Automatic blank changer
Twelve blanks and eleven tools. Mixed materials in the same queue without manual handling.
90° vertical milling
The tool works straight down into the blank from above. That way you can mill perfect buccal surfaces, which is especially useful on large constructions.
The entire milling file in the machine's memory
The job is transferred to the machine before it starts. The computer can be shut down or unplugged in the middle of a milling run without anything being lost.
Restart from the point of interruption
If the job stops, the software continues where it was. A blank is not lost because the power went out at three o'clock.
High milling speed
A zirconia crown in about 13 minutes. More units out of the same machine and the same working day.
Licence-free software
UPCAM is included with no annual fee and no license key to renew. Install it on more computers as the lab grows — the cost does not follow along.
Low tool cost
The tools cost considerably less than those for most milling machines and are on our shelf for next-day delivery.
Generously dimensioned components
Frame, guides and drive are dimensioned far beyond what the milling demands. That is why the precision holds up after thousands of jobs.
Tool monitoring
The CAM software calculates the wear and warns you in time. Fewer chipped restorations and fewer failed runs.
Electric ionizer
Neutralizes the static in the PMMA chips without compressed air. Together with the dust sealing, maintenance comes down to vacuuming.
Key figures
Axes5 simultaneous, A ±30°, B ±360°
Changer12 blanks
Tool magazine11, automatic tool change
Spindle900 W peak, 40,000 rpm
MachiningDry
Milling direction90° vertical plus five-axis angled
ClampingC-clamp, more milling clearance buccally
MaterialZirkonia, vax, PMMA, PEEK, komposit, sintrad CoCr
Blank sizeUp to 98 × 30 mm
Milling timeZirconia crown in about 13 min
Remote monitoringMillMind on your phone
Dimensions720 × 875 × 630 mm
Weight138 kg
Compressed airRequired for tool changes and spindle cooling
SoftwareUPCAM, license-free
Specifikationer
| Varumärke | UP3D |
Alternativprodukter
These other products might interest you