Asiga UltraGLOSS MAX tråg
Asiga MAX UltraGLOSS Build Tray

Asiga MAX ”UltraGLOSS” Tray 1L.

kr 1,099

SKU: ASIGA-UG-MAX
Tag:

Pre-polished straight from the 3D printer!

With UltraGLOSS™ trays for MAX, you get bite splints with a glossy and pre-polished surface that does not require manual post-polishing.

Here's how to maintain your Asiga trough.

Quick start guide
for UltraGLOSS™

You need to download and use the latest version of Composer. You can find it via your user account on Asiga.com

Important things to consider when nesting objects in Composer.

  • Check that the correct tray is selected. In the build dialogue, select UltraGLOSS from the list of trays.
  • Enter the recommended layer thickness. The optimal layer thickness is 0.05mm (50 µ) which gives a surface finish that is clear and glossy. You can still achieve a glossy surface finish if you print with thicker layers, however, each layer will be more visible.
Nesting in composer UltraGLOSS
Orientation UltraGLOSS

Optimal placement in the printer.

  • The bite splint should then be optimally positioned on the build platform to reduce the number of supports. Reducing the number of support points or eliminating them will reduce post-processing time, which will provide a better result when using UltraGLOSS trays.
  • Place the bite splint vertically and ensure that only the distal ends come into contact with the build platform.
  • Angle the splint approximately 10 degrees with the occlusal surface facing upwards.
  • The distal ends will need support. In most cases, no support is needed over the arch of the occlusal splint.
  • We recommend that you check for "islands" using the clipping tool in Composer before you start printing the bite splint.

UltraGLOSS™ in your printer.

  • If your 3D printer was manufactured before May 24, 2023, you need to update the firmware. You can download the latest version via your user account on Asiga.com
  • Check that the tray is clean and undamaged.
  • Place the UltraGLOSS tray in your 3D printer.
  • Fill the tray with material up to the marking.
KeySplint UltraGLOSS
Results UltraGLOSS

Cleaning.

  • How post-processing is done is crucial to ensuring that the surface of the bite splint remains shiny. Always follow the material manufacturer's instructions carefully along with the handling advice below.
  • Handle the occlusal splint with care when cleaning. Try to minimize contact with the occlusal splint. Handle the occlusal splint in support posts if available and be careful when touching the surface during washing as it is sensitive until it is fully cured. The image shows a comparison of two different post-processing outcomes.
Asiga UltraGLOSS

With UltraGLOSS trays, you get bite guards with a shiny and pre-polished surface that does not require manual post-polishing.

Used for bite splints.

Asiga Universal

The Universal tray is recommended for a variety of materials and types of objects that require high precision and where a matte surface is desired.

Used for working models, study models, dentures, crown & bridge, try-in dentures, surgical guides, individual trays, bite splints (matte surface).

Asiga Low Force

The Low Force tray is recommended for softer and flexible/elastic materials.

It is also optimized for printing parts with finer details and thin walls.

Used for soft splints, gingiva, IBT, partial dentures.

SKU: ASIGA-UG-MAX Category: Tag:

Related products

Others have also bought...